先進工程學刊 第4卷 第3期                                                                                                                                                                                                  出刊日期:2009年7月

序號

作者

論文名稱

頁次

摘要

1

廖麗滿、林志諭
Li-Man Liao, Zhi-Yu Lin

基因演算法求解多目標流程型工廠排程之研究
Genetic Algorithm for Multi-objective Flowshop Scheduling Problem

203-206

下載

2

羅志明、張宏帆
Chin-Ming Luo, Hung-Fan
Chang

技術創新預測方法修正模式
A Corrective Model of Technology Innovation Forecasting

207-212

下載

3

沈盈志、廖建義
Ying-Chih Shen, Jen-Yi
Liao

廣義Weibull競爭失效模式之可靠度靈敏度分析
Sensitivity Analysis on Reliability for the Generalized Weibull Competing Failure Mode

213-218

下載

4

鄭詠隆、張敏輝
Jason Cheng, Vincent
Chang

印刷電路板廢液回收之生產與存貨系統
The Production and Inventory System for Printed Circuit Board Waste Solution of
Recovery

219-221

下載

5

林君維、林國煇、許聖傑
Chun-Wei R. Lin, Kuo-Hui
G. Lin, Sheng-Jie J. Hsu

物流中心整合式揀貨與分流道管理策略之研究
Integration of Order Picking Process and Strategic Management of
Distribution Path in Distribution Center

223-228

下載

6

陳育仁、吳孟昇、陳裕民
Yuh-Jen Chen, Meng-
Sheng Wu, Yuh-Min Chen

虛擬企業之產品知識提供者推薦機制研發
Development of a Recommendation Mechanism of Product Knowledge Provider for Virtual Enterprises

229-237

下載

7

駱景堯、盧柏翔、李宜軒
Chinyao Low, Po-Hsiang
Lu, I-Hsuan Li

考慮混合分批送貨和取貨之車輛途程問題數學模式建構
A Mathematical Model of Vehicle Routing Problem with Split Delivery

239-241

下載

8

黃祥熙、黃竣民、張毓倫
Hsiang-Hsi Huang, Chun-
Min Huang, Yu-Lun Chang

預防保養與零工式生產排程之研究
Considering the Preventive Maintenance to Establish A Scheduling of A Job Shop
System

243-248

下載

9

楊明賢、高清貴
Ming-Hsien Yang, Ching-
Kuei Kao

以實務觀點構建之鋼鐵切割問題規劃模式
The Development of a Four-stage Planning Model for the Steel Cutting Problem from the
Practice Perspectives

249-252

下載

10

吳函諭、蔡啟揚、蔡耿良
Han-Yu Wu, Chi-Yang
Tsai, Keng-Liang Tsai

生產存貨模式及廢棄物清運策略之研究
Control Policies of Production and Waste Disposal in a Production/Inventory System
with Production Waste

253-258

下載

11

范書愷、張克偉
Shu-Kai S. Fan, Ko-Wei
Chang

應用特定型態質群最佳化演算法於搜尋D-Optimal 最佳設計之研究
Construct D-Optimal Designs Using Modified Particle Swarm Optimization

259-266

下載

全文

12

謝玲芬、黃羿蓁
Ling-Feng Hsieh, Yi-Chen
Huang

物流中心之揀貨環境決策最佳化之探討
The Optimum Decision-Making of Picking Conditions at Distribution Center

267-272

下載

13

林則孟、蔡建基、陳盈彥、陳子立
James T. Lin, Chien-Chi
Tsai, Yin-Yann Chen, Tzu-
Li Chen

考量等候時間限制之半導體爐管機台派工法則

Dispatching Rules with Queue-Time-Limit Consideration for Furnace in Wafer
Fabrication Factory

273-278

下載

14

孫天龍、陳振豪、鍾珮元、馮文陽、趙金榮
Tien-Lung Sun, Jen-Hau
Chen, Pei-Yuan Chung,
Wen-Yang Feng, Chin-
Jung Chao

含人模虛擬場景之互動設定與控制以支援產品設計人因評估

Human-included VR Model Interaction Specification and Control for Human-Centered Design Evaluation

279-282

下載

15

廖昱筌、劉選泓、蔡明儒、賴季廷、柳永青
Yu-Chuan Liao, Shiuan-
Hung Liou, Ming-Ru Tsai,
Chi-Ting Lai, Yung-Ching
Liu

路燈光源與道路環境對辨識路旁行人反應之影響

Impact of Street Light and Road Environment on the Detection of Roadside Pedestrian

283-287

下載

16

張煒嵩、徐旭昇、陳建隆
Wei-Shung Chang, Chiuh-
Cheng Chyu, Jian-Rong
Cheng

基因演算法於多目標TFT-LCD模組廠排程問題之研究
A Genetic Algorithm for the Multi-objective TFT-LCD Module Production Scheduling
Problem

289-294

下載

17

王炯柱、楊大和
Jeong-Juh Wang, Taho
Yang

以離散事件模擬進行晶圓代工回收水系統流程之設計與分析
The Use of Discrete-event Simulation for the Design and Analysis of the Reclaim-water
System from an IC Foundry Fab

295-304

下載

18

黃祥熙、黃昱偉、張殷豪
Hsiang-Hsi Huang, Yu-
Wei Huang, Yin-Hao
Chang

多樓層設施佈置之研究
Solving the Problem in Multiple-floor Facilities Layout

305-311

下載